URL format

You can convert and resize images by requesting them via a specially-formatted URL. This way you do not need to write any code, only change HTML markup of your website to use the new URLs. The format is:

https://<ZONE>/cdn-cgi/image/<OPTIONS>/<SOURCE-IMAGE>

Here is a breakdown of each part of the URL:

Here is an example of an URL with <OPTIONS> set to width=80,quality=75 and a <SOURCE-IMAGE> of uploads/avatar1.jpg:

<img src="/cdn-cgi/image/width=80,quality=75/uploads/avatar1.jpg" />

​​ Options

You must specify at least one option. Options are comma-separated (spaces are not allowed anywhere). Names of options can be specified in full or abbreviated.

​​ anim

Whether to preserve animation frames from input files. Default is true. Setting it to false reduces animations to still images. This setting is recommended when enlarging images or processing arbitrary user content, because large GIF animations can weigh tens or even hundreds of megabytes. It is also useful to set anim:false when using format:"json" to get the response quicker without the number of frames. Example:

URL format
anim=false

Workers
cf: {image: {anim: false}}

​​ background

Background color to add underneath the image. Applies only to images with transparency (for example, PNG). Accepts any CSS color, such as #RRGGBB and rgba(…). Example:

URL format
background=%23RRGGBB

OR

background=red

Workers
cf: {image: {background: "#RRGGBB"}}

​​ blur

Blur radius between 1 (slight blur) and 250 (maximum). Be aware that you cannot use this option to reliably obscure image content, because savvy users can modify an image’s URL and remove the blur option. Use Workers to control which options can be set. Example:

URL format
blur=50

Workers
cf: {image: {blur: 50}}

​​ brightness

Increase brightness by a factor. A value of 1.0 equals no change, a value of 0.5 equals half brightness, and a value of 2.0 equals twice as bright. 0 is ignored. Example:

URL format
brightness=0.5

Workers
cf: {image: {brightness: 0.5}}

​​ contrast

Increase contrast by a factor. A value of 1.0 equals no change, a value of 0.5 equals low contrast, and a value of 2.0 equals high contrast. 0 is ignored. Example:

URL format
contrast=0.5

Workers
cf: {image: {contrast: 0.5}}

​​ dpr

Device Pixel Ratio. Default is 1. Multiplier for width/height that makes it easier to specify higher-DPI sizes in <img srcset>. Example:

URL format
dpr=1

Workers
cf: {image: {dpr: 1}}

​​ fit

Affects interpretation of width and height. All resizing modes preserve aspect ratio. Used as a string in Workers integration. Available modes are:

• scale-down
  Similar to contain, but the image is never enlarged. If the image is larger than given width or height, it will be resized. Otherwise its original size will be kept. Example:

URL format
fit=scale-down

Workers
cf: {image: {fit: "scale-down"}}

• contain
  Image will be resized (shrunk or enlarged) to be as large as possible within the given width or height while preserving the aspect ratio. If you only provide a single dimension (for example, only width), the image will be shrunk or enlarged to exactly match that dimension. Example:

URL format
fit=contain

Workers
cf: {image: {fit: "contain"}}

• cover
  Resizes (shrinks or enlarges) to fill the entire area of width and height. If the image has an aspect ratio different from the ratio of width and height, it will be cropped to fit. Example:

URL format
fit=cover

Workers
cf: {image: {fit: "cover"}}

• crop
  Image will be shrunk and cropped to fit within the area specified by width and height. The image will not be enlarged. For images smaller than the given dimensions, it is the same as scale-down. For images larger than the given dimensions, it is the same as cover. See also trim. Example:

URL format
fit=crop

Workers
cf: {image: {fit: "crop"}}

• pad
  Resizes to the maximum size that fits within the given width and height, and then fills the remaining area with a background color (white by default). This mode is not recommended, since you can achieve the same effect more efficiently with the contain mode and the CSS object-fit: contain property. Example:

URL format
fit=pad

Workers
cf: {image: {fit: "pad"}}

​​ format

The auto option will serve the WebP or AVIF format to browsers that support it. If this option is not specified, a standard format like JPEG or PNG will be used.

Workers integration supports:

• avif: Generate images in AVIF format if possible (with WebP as a fallback).
• webp: Generate images in Google WebP format. Set the quality to 100 to get the WebP lossless format.
• json: Instead of generating an image, outputs information about the image in JSON format. The JSON object will contain data such as image size (before and after resizing), source image’s MIME type, and file size.

Example:

URL format
format=auto

Workers
cf: {image: {format: "avif"}}

For the format:auto option to work with a custom Worker, you need to parse the Accept header. Refer to this example Worker for a complete overview of how to set up an Image Resizing Worker.

Custom Worker for Image Resizing with `format:auto`
const accept = request.headers.get("accept");
let image = {};

if (/image\/avif/.test(accept)) {
    image.format = "avif";
} else if (/image\/webp/.test(accept)) {
    image.format = "webp";
}

return fetch(url, {cf:{image}});

​​ gamma

Increase exposure by a factor. A value of 1.0 equals no change, a value of 0.5 darkens the image, and a value of 2.0 lightens the image. 0 is ignored. Example:

URL format
gamma=0.5

Workers
cf: {image: {gamma: 0.5}}

​​ gravity

When cropping with fit: "cover" and fit: "crop", this parameter defines the side or point that should not be cropped. Available options are:

• auto
  Selects focal point based on saliency detection (using maximum symmetric surround algorithm). Example:

URL format
gravity=auto

Workers
cf: {image: {gravity: "auto"}}

• side
  A side ("left", "right", "top", "bottom") or coordinates specified on a scale from 0.0 (top or left) to 1.0 (bottom or right), 0.5 being the center. The X and Y coordinates are separated by lowercase x in the URL format. For example, 0x1 means left and bottom, 0.5x0.5 is the center, 0.5x0.33 is a point in the top third of the image.

  For the Workers integration, use an object {x, y} to specify coordinates. It contains focal point coordinates in the original image expressed as fractions ranging from 0.0 (top or left) to 1.0 (bottom or right), with 0.5 being the center. {fit: "cover", gravity: {x:0.5, y:0.2}} will crop each side to preserve as much as possible around a point at 20% of the height of the source image. Example:

URL format
gravity=left

or

gravity=0x1

Workers
cf: {image: {gravity: "right"}}

or

cf: {image: {gravity: {x:0.5, y:0.2}}}

​​ height

Specifies maximum height of the image in pixels. Exact behavior depends on the fit mode (described below). Example:

URL format
height=250

Workers
cf: {image: {height: 250}}

​​ metadata

Controls amount of invisible metadata (EXIF data) that should be preserved. Color profiles and EXIF rotation are applied to the image even if the metadata is discarded. Note that if the Polish feature is enabled, all metadata may have been removed already and this option will have no effect. Options are:

• keep
  Preserves most of EXIF metadata, including GPS location if present. Example:

URL format
metadata=keep

Workers
cf: {image: {metadata: "keep"}}

• copyright
  Discard all metadata except EXIF copyright tag. This is the default behavior for JPEG images. Example:

URL format
metadata=copyright

Workers
cf: {image: {metadata: "copyright"}}

• none
  Discard all invisible EXIF metadata. Currently, WebP and PNG output formats always discard metadata. Example:

URL format
metadata=none

Workers
cf: {image: {metadata: "none"}}

​​ onerror=redirect

In case of a fatal error that prevents the image from being resized, redirects to the unresized source image URL. This may be useful in case some images require user authentication and cannot be fetched anonymously via Worker. This option should not be used if there is a chance the source image is very large. This option is ignored if the image is from another domain, but you can use it with subdomains. Example:

URL format
onerror=redirect

Workers
cf: {image: {onerror: "redirect"}}

​​ quality

Specifies quality for images in JPEG, WebP, and AVIF formats. The quality is in a 1-100 scale, but useful values are between 50 (low quality, small file size) and 90 (high quality, large file size). 85 is the default. When using the PNG format, an explicit quality setting allows use of PNG8 (palette) variant of the format. Example:

URL format
quality=50

Workers
cf: {image: {quality: 50}}

​​ rotate

Number of degrees (90, 180, or 270) to rotate the image by. width and height options refer to axes after rotation. Example:

URL format
rotate=90

Workers
cf: {image: {rotate: 90}}

​​ sharpen

Specifies strength of sharpening filter to apply to the image. The value is a floating-point number between 0 (no sharpening, default) and 10 (maximum). 1 is a recommended value for downscaled images. Example:

URL format
sharpen=2

Workers
cf: {image: {sharpen: 2}}

​​ trim

Specifies a number of pixels to cut off on each side. Allows removal of borders or cutting out a specific fragment of an image. Trimming is performed before resizing or rotation. Takes dpr into account. For Image Resizing and Cloudflare Images, use as four numbers in pixels separated by a semicolon, in the form of top;right;bottom;left. For the Workers integration, specify an object with four properties: {top, right, bottom, left}. Example:

URL format
trim=20;30;20;0

Workers
cf: {image: {trim: {"top": 12, "bottom": 34, "left": 56, "right": 78}}}

​​ width

Specifies maximum width of the image in pixels. Exact behavior depends on the fit mode (described below). Example:

URL format
width=250

Workers
cf: {image: {width: 250}}

​​ Recommended image sizes

Ideally, image sizes should match exactly the size they are displayed on the page. If the page contains thumbnails with markup such as <img width="200" …>, then images should be resized to width=200. If the exact size is not known ahead of time, use the responsive images technique.

If you cannot use the <img srcset> markup, and have to hardcode specific maximum sizes, Cloudflare recommends the following sizes:

• Maximum of 1920 pixels for desktop browsers.
• Maximum of 960 pixels for tablets.
• Maximum of 640 pixels for mobile phones.

Here is an example of markup to configure a maximum size for your image:

/cdn-cgi/image/fit=scale-down,width=1920/<YOUR-IMAGE>

The fit=scale-down option ensures that the image will not be enlarged unnecessarily.

You can detect device type by enabling the CF-Device-Type header via Page Rule Open external link .

​​ Caching

Resizing causes the original image to be fetched from the origin server and cached — following the usual rules of HTTP caching, Cache-Control header, etc.. Requests for multiple different image sizes are likely to reuse the cached original image, without causing extra transfers from the origin server.

Resized images follow the same caching rules as the original image they were resized from, except the minimum cache time is one hour. If you need images to be updated more frequently, add must-revalidate to the Cache-Control header. Resizing supports cache revalidation, so we recommend serving images with the Etag header. Refer to the Cache docs for more information.

We do not support purging of resized variants individually. URLs starting with /cdn-cgi/ cannot be purged. However, purging of the original image’s URL will also purge all of its resized variants.