Collect packet captures (PCAPs)

The PCAPs API needs both system and type to be specified to start a capture. A PCAP’s system is the product or logical subsystem where packets are captured, and a PCAP’s type is how the captured packets are built into a PCAP file.

To create a simple PCAP request, send a JSON body with the required parameter listed at Create simple PCAP request Open external link .

For full PCAP requests, refer to the required parameters listed at Create full PCAP requests Open external link . Note that full packet captures require two more parameters than simple packets.

The full PCAP request endpoint also contains optional fields you can use to limit the amount of packets captured. Both full and simple packet requests contain an optional filter_v1 parameter you can use to filter packets by IPv4 Source address, for example. For a full list of the filter options, refer to the parameter lists above.

Currently, you can only send one collect request per minute for simple PCAPs, and you can only have one running or pending full PCAP at a time.

Full PCAPs

Leave filter_v1 empty to collect all packets without any filtering.

Full PCAP example request
  curl -X POST https://api.cloudflare.com/client/v4/accounts/${account_id}/pcaps \
  -H 'Content-Type: application/json' \
  -H "X-Auth-Email: ${email}" \
  -H "X-Auth-Key: ${auth_key}" \
  --data '{
          "filter_v1": {},
          "time_limit": 300,
          "packet_limit": 10000,
          "byte_limit": 100000000,
          "type": "full",
          "colo": "ORD",
          "system": "magic-transit",
           "destination_conf": "${bucket}"
           }'

While the collection is in progress, the response returns the status field as pending. You must wait for the PCAP collection to complete before downloading the file. When the PCAP is ready to download, the status changes to success.

Full PCAP example response
    {
      "result": {
        "id": "7d7c88382f0b4d5daa9587aa45a1a877",
        "submitted": "2022-06-02T18:38:22.269047Z",
        "filter_v1": {},
        "time_limit": 300,
        "status": "pending",
        "type": "full",
        "system": "magic-transit",
        "packet_limit": 10000,
        "byte_limit": 100000000,
        "colo": "ORD",
        "destination_conf": "gs://test-magic-pcaps"
      },
      "success": true,
      "errors": [],
      "messages": []
    }

Leave filter_v1 to collect all packets without any filtering.

Simple PCAP example request
  curl -X POST https://api.cloudflare.com/client/v4/accounts/${account_id}/pcaps \
  -H 'Content-Type: application/json' \
  -H 'X-Auth-Email: user@example.com' \
  -H 'X-Auth-Key: 00000000000' \
  --data '{
          "filter_v1": {
                  "source_address": "1.2.3.4",
                  "source_port": 123,
                  "destination_address": "5.6.7.8",
                  "destination_port": 80,
                  "protocol": 6
          },
          "time_limit": 300,
          "packet_limit": 10000,
          "type": "simple",
          "system": "magic-transit"
  }'

The response is a JSON body that contains the details of the job running to build the packet capture. The response contains a unique identifier for the packet capture request along with the details sent in the request.

Simple PCAP example response
    {
      "result": {
        "id": "6d1f0aac13cd40e3900d29f5dd0e8a2b",
        "submitted": "2021-12-20T17:29:20.641845Z",
        "filter_v1": {
          "source_address": "1.2.3.4",
          "source_port": 123,
          "destination_address": "5.6.7.8",
          "destination_port": 80,
          "protocol": 6
        },
        "time_limit": 60,
        "status": "pending",
        "packets_remaining": 0,
        "type": "simple",
        "system": "magic-transit"
      },
      "success": true,
      "errors": [],
      "messages": []
    }

1. Log in to your Cloudflare dashboard Open external link and select Magic Transit.
2. On the Magic Transit page next to Packet captures, select Start a capture.
3. Select the Captures tab and select Start a capture.
4. From Packet captures - Capture configuration, choose a capture type and select Next.
5. Fill out the required fields to begin the capture and then select Start.

The main Packet captures page displays a list of captures.

To check the status of a running job, send a request to the endpoint and specify the PCAP identifier. The PCAP identifier is received in the response of a collect request as shown in the previous step.

    curl -X GET https://api.cloudflare.com/client/v4/accounts/${account_id}/pcaps/${pcap_id} \
    -H 'Content-Type: application/json' \
    -H 'X-Auth-Email: user@example.com' \
    -H 'X-Auth-Key: 00000000000'

The response will be similar to the one received when requesting a PCAP collection.

Simple PCAP example result
    {
      "result": {
        "id": "6d1f0aac13cd40e3900d29f5dd0e8a2b",
        "submitted": "2021-12-20T17:29:20.641845Z",
        "filter_v1": {
          "source_address": "1.2.3.4",
          "source_port": 123,
          "destination_address": "5.6.7.8",
          "destination_port": 80,
          "protocol": 6
        },
        "time_limit": 120,
        "status": "success",
        "packets_remaining": 0,
        "type": "simple",
        "system": "magic-transit"
      },
      "success": true,
      "errors": [],
      "messages": []
    }

1. Log in to your Cloudflare dashboard Open external link and select Magic Transit.
2. On the Magic Transit page next to Packet captures, select Start a capture.
3. From the Packet Capture page, select the Captures tab.

For more information on how to process multiple saved capture files into a single output file, refer to Wireshark’s mergecap documentation Open external link .

Full PCAPs

To obtain full PCAPs, download the files from the bucket specified in destination_conf after the PCAP’s status is success. You may find multiple files named pcap_<pcap_id>.pcap per capture as captures can occur across multiple machines.

Simple PCAPs

Once the simple PCAP collection is complete, you can download the PCAP by specifying the PCAP identifier used earlier.

    curl -X GET https://api.cloudflare.com/client/v4/accounts/${account_id}/pcaps/${pcap_id}/download \
    -H 'Content-Type: application/json' \
    -H 'X-Auth-Email: user@example.com' \
    -H 'X-Auth-Key: 00000000000' \
    --output download.pcap

1. Log in to your Cloudflare dashboard Open external link and select Magic Transit.
2. On the Magic Transit page next to Packet captures, select Start a capture.
3. From the Packet captures page, select the Captures tab.
4. Locate your packet capture you want to download and under Captures, select the link to open download it.

Packet captures are available to download when the Status displays Success.

To view a list of sent requests, use the following command:

List request example
    curl -X GET https://api.cloudflare.com/client/v4/accounts/${account_id}/pcaps \
    -H 'Content-Type: application/json' \
    -H 'X-Auth-Email: user@example.com' \
    -H 'X-Auth-Key: 00000000000'

The response returns an array that includes up to 50 sent requests, which includes completed and ongoing requests.

List response example
    {
      "result": [
        {
          "id": "43adab5adeca4dab9c51f4b7f70f2ec3",
          "submitted": "2021-12-15T03:04:09.277394Z",
          "filter_v1": {},
          "time_limit": 120,
          "status": "success",
          "packets_remaining": 0,
          "type": "simple",
          "system": "magic-transit"
        }
      ],
      "success": true,
      "errors": [],
      "messages": []
    }

1. Log in to your Cloudflare dashboard Open external link and select Magic Transit.
2. On the Magic Transit page next to Packet captures, select Start a capture.
3. From the Packet captures page, select the Captures tab.

The list of captures associated with your account displays.